You might want to name it to correspond to the drive's physical characteristics, e.g., /mnt/sda1, or /mnt/120GB_USB_hard_disk.Ĭonnect to device, once connected, to find devices attached type You can create a new directory under /mnt for each partition to be mounted, and it can be named anything you want as long as it doesn't contain any spaces. There is a canonical (i.e., standard) directory path where mount points are usually created: the /mnt directory. In order to make a partition accessible to the file system, you need to use the Linux 'mount' command, referencing the hardware (e.g., /dev/sda1) and a 'mount point' in the file system, which is any empty directory, usually created for the purpose by the user. I am also assuming that your USB hard-drive is /dev/sda1 when connected to your Raspberry pi. _SD_Card_S etup) and are able to connect it it and run commands. I am assuming that you have already setup your raspberry pi ( These instructions are based on installing Owncloud on your new raspberry pi connected with a usb HDD.Īn Ethernet cable to connect to the local network

Raspberry pi how to format usb drive